Instructions

Applying Wallallure stickers

Step 1: When applying the sticker to a wall, window or any smooth surface please make sure it is free of dust and dirt. We recommend wiping the surface with a cloth to remove any dirt that may prevent the sticker from adhering to the surface.
Step 2: The sticker is stuck between the backing paper (white) and the transfer paper (translucent). Place the sticker with the backing facing up and the transfer paper facing down. Apply firm even pressure over the sticker through the backing paper using a blunt object (like the TV remote). This is to make sure that the sticker transfers to the transfer paper.
Step 3: With the backing paper still facing up, hold down one corner of the transfer paper and gently peel the backing paper away from the transfer paper. Make sure that none of the sticker pieces are left on the grid paper - if this does happen use the blunt object and gently press through the grid paper so the all of the sticker pieces transfer onto the transfer paper.
Step 4: With the entire sticker left attached to the transfer paper, you are now read to apply it. Prior to applying the sticker it is important that you decide exactly where you are placing the sticker as once it is applied it can not be re-used.
Step 5: Face the sticky side of the sticker down in the place that you want, with the transfer paper facing up and apply even, firm pressure using the blunt object to ensure the complete removal of any air bubbles. Gently peel the transfer paper away from the sticker. Make sure the no parts of the sticker are left attached to the transfer paper.
Step 6: In the event that there are air bubbles remaining after the sticker has been applied, simple puncture with a small straight pin and press down with your fingers.
Step 7: Stand back and enjoy your work of art!

Removing Wallallure Stickers

When you wish to remove the sticker, simply warm it up a bit with a hair dryer (to loosen the adhesive) and peel it off.